STRAIGHT
CUTTING OIL ADDITIVE
OCN
5052 has been formulated to give excellent antiwear and E.P. chracteristics to
cover a broad range of metal cutting applications. The product should be
blended with highly refined base stocks by using special refining techniques.
Performance:
OCN 5052 when formulated with proper base stocks gives excellent chemical and
oxidation stability with good heat transfer properties. Due to its better
surface finishing and adequate E.P. and antiwear performance it provides
excellent metal properties without staining the metal surfaces. It is non toxic
and non corrosive.
Dosage: 1.0
to 3.0 % w/w in proper viscosity and type of base oils to achieve the required
performance for end application.
Properties
|
Typical
values
|
Color,
ASTM, max.
|
4.0
|
Viscosity
cSt,@ 100 °C
|
10
|
Flash
Point °C ., COC
|
130
|
Neut.
No. mg KOH/gm
|
1.0
|
Pour
Point, °C
|
0
|
Cu.strip
Corrosion 3 hrs.@ 100°C (ASTM)
|
1
|
Four
ball weld load test @2 % treat level, Kgs.
|
350
|