:: Additives --- ID :: 12928
OCN 5049Q
OCN 5049Q

QUENCHING OIL ADDITIVE

OCN 5049 Q has been formulated to give excellent quenching characteristics to cover a broad range of heat transfer of heat transfer applications. The product should be blended with highly refined base stocks to achieve better results.

Performance: OCN 5049Q when formulated with proper base stocks gives excellent quench time properities It is non toxic and non corrosive.

Dosage:1.25- 1.50% w/w in proper viscosity and typeof base oils.

Properties

Typical values

Apperance

Bright & clear

Colour

Amber

Viscosity cSt, @ 100 °C

11

Flash point °C., COC

140

TBN

25

Nitrogen % wt,min

1.3

Ca % wt,min

1.0

        

Features:

    Ø   It contains special type of dispersants, which helps in reducing the carbon residue and viscosity rise by almost 250 %, whichin turn protects oil degradation.

    Ø  The deposit formations are reduced to extreme extent due to better detergency.

    Ø  Compatible with all conventional available quenching oils.

    Ø  The thermal & oxidation stability of the formulated oils with OCN 5049Q is 3 times superior than conventional available quenching oils.

    Ø  It has excellent results in ASTM D 130 test comparative to other packages in prolonged exposures to heat. It passes Cincinati Milacron thermal stability test.

    Ø  Longer drains periods and constant saving in fuel due to better heat transfer and better dispersancy.

    Better quenching times can be achieved with various dosage due to high polar components present in the package.

 The following properties are achieved by formulating quenching fluids with 1.50% w/w of OCN 5049Q in ISO VG 32 grade base oils.

 

Properties

                 Typical values


     (S.N.150)

 (Turbine Base)

Viscosity cSt,@ 40 °C.

32

32

Viscosity index

95

105

Flash point  °C.COC

200

216

Pour Point, °C.

(-)3

(-)6

Cu.Strip Corrosion 3 Hrs @ 100 °C (ASTM D 130),max

1

1

Rust Test (ASTM D 665 A & B)

Pass

pass

Cincinati Milacron thermal stability test

Pass

Pass

Demulsibilty (ASTM  D 1401) in 10 minutes

40-40-0

40-40-0

Quenching time (GM Quenchometer test ) Seconds

16

13

RBOT, induction time,minutes

300+

450+

Dispersancy test IP 48, (150°C /48hrs/10 ltr / hr air)

 

 

 

CCR % wt increase

1.1

.6

Viscosity % increase

4.0

2.0

TAN increase %

1.5

.5